Wheel Torque Chart; Wheel Lug Nut Tightening Sequence - JLG TOUCAN 12E Operation And Safety Manual

SECTION 5 – GENERAL SPECIFICATIONS AND MAINTENANCE
2.
Tighten lug nuts in the following sequence.
Front
Figure 5-11. Wheel Lug Nut Tightening Sequence
5-20
Rear
– JLG Lift –
3.
The tightening of the lug nuts should be done in stages. Following the rec-
ommended sequence, tighten lug nut per wheel torque.
Table 5-9. Wheel Torque Chart
Torque Sequence - Front Wheels
st nd
1 Stage 2 Stage
50 N.m (37 lb.ft) 160 N.m (118 lb.ft)
Torque Sequence - Rear Wheels
st nd
1 Stage 2 Stage
50 N.m (37 lb.ft) 140 N.m (103 lb.ft)
4.
Wheel lug nuts should be torqued after the first 50 hours of operation and
after each wheel removal. Check torque every 3 month or 125 hours of
operation.
rd
3 Stage
250 N.m (184 lb.ft)
rd
3 Stage
210 N.m (155 lb.ft)
31210313