Connection To The Web Pages - AGFA DRYSTAR 5302 Technical Documentation Manual

DD+DIS150.05E
2.5.4
USAGE
The reader should always refer to MedNet to ensure that they are working with the latest copy of the document.
Edition 1, Revision 0
2005-09-09
Machine specific tools, software tools and auxiliary means

Connection to the web pages

(1) Connect the Service PC to the
network
(2) Start the browser (Internet
Explorer ≥ 5)
(3) Enter the IP address of the printer
in the address window.
In case the printer homepage is
not displayed, refer to 2.5.4.1
'Adaptation of the PC IP address'
next page.
As an alternative, if it is not possible
to put the Service PC into the hospital
network:
(1) Use a crossed network UTP cable
to connect the network interface
of the Service PC directly with the
network interface of the printer.
(2) Start the browser (Internet
Explorer ≥ 5)
(3) Enter the IP address of the printer
in the address window. In case
the printer homepage is not
displayed, refer to 2.5.4.1
'Adaptation of the PC IP address'
next page.
Printed copies of this document are not controlled.
(Type 5366/100)
Crossed UTP network cable
Drystar 5302
Repair and Service
Service PC
Printer
Figure 19
Figure 20
Chapter 3.2/25
Agfa Company Confidential
536632el.cdr
Printer
536632ek.cdr