Cleaning Of Thermal Print Head - AGFA DRYSTAR 5302 Technical Documentation Manual

DD+DIS149.05E
4.8
The reader should always refer to MedNet to ensure that they are working with the latest copy of the document.
Edition 1, Revision 0
2005-09-09

Cleaning of Thermal print head

(1) Clean the TH resistor line with a
lint free cloth lightly moistened
with Isopropyl - alcohol or a
cleaning tissue.
• The last cleaning action must
be carried out in one way!
• For the Isopropyl alcohol
observe the rule: As less water
is in the alcohol as better. We
recommend using a 90%
Isopropyl alcohol.
(2) Remount all covers
(3) Insert both input trays
Caution:
• Be carefull at TH cleaning.
• The electronic circuits under the IC cover can be damaged.
• During cleaning do not press against the IC cover.
Only use very little alcohol to moisten the cloth.
Printed copies of this document are not controlled.
DRYSTAR 5302
(Type 5366/100)
Maintenance
536609cg.cdr
Figure 13
Chapter 9 / 13
Agfa Company Confidential