AGFA DRYSTAR 5302 Technical Documentation Manual page 295

DD+DIS150.05E
The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled.
Edition 1, Revision 1
06-2009
HOME HELP
Network Configuration
Basic IP Routing DNS Ethernet
Basic IP settings
IP address
Host name
Domain
Subnetmask
Obtain IP settings automatically (RARP/BOOTP/DHCP)
OK Changes require reboot
HOME HELP
Network Configuration
Basic IP Routing DNS Ethernet
Routing
Default gateway
OK Changes require reboot
More Routes
Reach Device
OK Changes require reboot
Test Routes
Ping a device
HOME HELP
Network Configuration
Basic IP Routing DNS Ethernet
DNS servers
A DNS server translates a given hostname into an IP address.
Remove
Add Changes require reboot
Test DNS
Enter a hostname:
HOME HELP
Network Configuration
Basic IP Routing DNS Ethernet
Ethernet
Current line properties: 100 Mbit Full-Duplex
Link partner (other side): : 100FD 100HD 10FD 10HD autonegotiation
Ethernet (MAC) address: 08:00:66:80:44:09
Setup: Type: UTP MII address:
Auto negotiation, capabilities:
10 MBit Half Duplex
10 MBit Full Duplex
100 MBit Half Duplex
100 MBit Full Duplex
Fixed (no negotiation)
HALF DUPLEX
10 Mbit
Warning: changes become active immediately !!!
Save settings to file (only enable this after a test)
OK Factory Defaults
Figure 12: Service tool details (part 6)
DOCUMENT CONTROL NOTE:
DRYSTAR 5302
Software Menus, Settings
S12
Reboot Device
no
Reboot Device
S12.1
via gateway:
Ping
Reboot Device
S12.2
Resolve
Reboot Device
Clear Counters
5366/100
Repair and Service
S12.3
S12.2
S12.1
S12.3
Counters:
Total Rx Packets = 2056422
Total Rx ERROR Packets = 0
Total Tx Packets = 196164
Defer Xmission Count = 0
Carrier Lost Count = 0
Out Of Window Collissions = 0
Collisions Count = 0
Excess Collisions Count = 0
Transmit FIFO underrun = 0
Receive FIFO overrun = 0
Chapter 3.7 / 17
Agfa Company Confidential