Contents; General Plan; Graphic And Text Pages - AGFA MSC 100 Technical Documentation Manual

General

Contents

General Plan

Graphic and text pages

Note
1.4
26.02.99 /PN 8042
Every Register has a Contents so that graphic and text pages can be found rapidly:
− Designation of assembly groups (in three languages)
− No. of assembly groups
− No. of pages
The Contents is followed by a one or two-page graphic overview, stating the name of
the assembly group (in English) and the number of the assembly group: The
representation of the location in the machine should help to find the required assembly
group and the searched spare part.
− Left page
Graphic with item numbers
− Right page
Pertaining spare parts list with part numbers
The graphic and the text are allocated by means of item numbers.
1. If the text part consists of several pages, the graphic is repeated a corresponding
number of times.
2. If several graphics belong to a text part, they are numbered, e.g. two graphics are
numbered 1/2 and 2/2. If the text part encompasses several pages, graphic 1/2 is
shown several times on the left page and then graphic 2/2.
Meaning of the letters T or U behind the item number:
− T = CE (TÜV) Version for Europe
− U = UL
Version for the USA
Item numbers without these identification letters apply to both versions.
Spare Parts
AGFA MSC 100