AGFA DRYSTAR 5302 Technical Documentation Manual page 288

DD+DIS150 .05E
2.4.1
Key-Operator - Change Image quality settings
Default film calibration
Default Densitometer
Accept changes Discard changes Reset Values
Key-Operator - Change Image quality settings
Accept changes Discard changes Reset Values
9.1
Choose Dataset
Proceed
The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled.
Edition 1, Revision 1
06-2009
Welcome to this
DryStar 5302 printer
off
on
Macbeth TR924
Gretag
X-Rite 301
X-Rite 310
Welcome to this
DryStar 5302 printer
Select frequency
Every packs
5
Welcome to this
DryStar 5302 printer
Key-Operator - Installation
Before install.
please make backup
1. OK, make backup
2. SKIP backup
Go back
Welcome to this
DryStar 5302 printer
Key-Operator - Installation
Browse .....
Go Back Reset Values
Figure 5: Key-operator tools – 2
DOCUMENT CONTROL NOTE:
DRYSTAR 5302
Software Menus, Settings
3.1
DryStar 5302 printer
Key-Operator - Print image
1. Ktbwd2n.zip
2. smpte_kan.zip
3. smpte_l300.zip
4. smpte_lin.zip
5. tpa.zip
Go back
8.1
Key-Operator - Service actions
Data of last QC measuring
Date: 20-NOV-2004
Time: 09:01
Initials:
Max D: 3.1
DD: 0.2
Mid Density: 1.1
Base + Fog: 0.2
New reference:
Comment:
Accept changes Go Back
7.1
Key-Operator - Service actions
1. Maintenance settings
2. Pending maintenance actions
3. Closed maintenance actions
Go back
Key-Operator - Service actions
MAINTENANCE SETTINGS
Reset Item
Thermal head cleaning required
Replace thermal head anti dust filter
Replace thermal head (end of life)
Film calibration upper tray required
Film calibration lower tray required
Service maintenance required
Go back
nd
level (Part 2)
5366/100
Repair and Service
Welcome to this
Welcome to this
DryStar 5302 printer
yes
no
New QC measuring
Reset Values
Welcome to this
DryStar 5302 printer
Welcome to this
DryStar 5302 printer
Cycles to go Factory settings
4841 5000
24841 25000
62500 62500
39841 40000
500
5000
2333 5000
Chapter 3.7 / 10
Agfa Company Confidential