AGFA DRYSTAR 5302 Technical Documentation Manual page 291

DD+DIS150.05E
The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled.
Edition 1, Revision 1
06-2009
!CalibrationRestore
HOME
class com.agfa.med.odin.printerserver.CalibrationRestore
Default uppertray Return to the default filmcalibration values.
Current calibration will be copied to a backup.
Default lowertray Return to the default filmcalibration values.
Current calibration will be copied to a backup.
Default Profile Return to the default TPH profile calibration values.
Current values will be copied to a backup.
Default CDM Return to the default CDM calibration values.
Current values will be copied to a backup.
Default DT2 B Return to the default MDM-calibration values.
Current values will be copied to a backup.
Default DT2 M Return to the default MDM-calibration values.
Current values will be copied to a backup.
Default uppertray Default lowertray
HOME HELP
Reduction icon on image:
Kernel: when no image scaling is needed for CubicHighRes:
Automatically switch to CubicBell:
Use CubicBell smooth factor:
Changes require reboot
OK
HOME HELP
DICOM Input Setup
Dicom Print SCP Servers
Setup Dicom Print SCP Servers
Dicom Host Profiles
A 'Host Profile' defines the print parameters for a specific host (modality).
Available Host Profiles:
New
View/Edit
Remove
Clone
Import/Export
At run-time, profile selection is done based on the incoming 'Calling AE title'
and the receiving SCP server.
If no profile is found, the default (site) profile will be used.
Edit the default (site) profile
Input status
S10.2
idle
Refresh
Update profile database
Select profile database file to upload:
Upload new DB
Figure 8: Service tool details (part 2)
DOCUMENT CONTROL NOTE:
DRYSTAR 5302
5366/100
Software Menus, Settings
Default Profile Default CDM
Controller Setup
yes
yes
0.35
( >= 0.1 and <= 10 )
see page 14
S10.1
see page 15
S10.3
Validate profiles Auto Dicom Configuration
see page 14
Browse ...
Repair and Service
S8
Default DT2 B Default DT2 M
S9
S10
Chapter 3.7 / 13
Agfa Company Confidential