AGFA DRYSTAR 5302 Technical Documentation Manual page 125

DD+DIS150.05E
The reader should always refer to MedNet to ensure that they are working with the latest copy of the document.
Edition 1, Revision 0
2005-09-09
Machine specific tools, software tools and auxiliary means
As long as a key-operator or service command session via web pages is
active, access to the printer via local keypad is not possible.
The printer will show the message: 'Remote Service active'.
Do not work with the key-operator or service command session web pages at
the printer as long as the customer is using the printer.
Printed copies of this document are not controlled.
Drystar 5302
(Type 5366/100)
Repair and Service
function like Key-operator Menu on local
keypad.
7. Enter service command session: Same
function like Service Menu on local keypad.
8. Release remote command session: Makes a
reset on the Key-operator / Service command
session, to release the connection, in case
the session hangs.
9. Reboot Drystar*: Reboots the printer.
10. Scaling Setup: Menu to define general image
interpolation related settings
11. DICOM profile editor: Different menus to
define printer behavior regarding DICOM
communication.
12. LPD profile editor: Different menus to define
printer behavior regarding Postscript
communication
13. Network Configuration: Allows special
network settings to adapt to other network
devices.
14. Printqueue editor*: Provides functions for
extended queue management.
15. Controller logging*: Provides functions to
view, filter, adapt and save log files.
16. Modules: Provides functions to check sensors
and motors of single modules.
Refer to Figure 17
Agfa Company Confidential
Chapter 3.2/23