Introduction - AGFA DRYSTAR 5302 Technical Documentation Manual

DD+DIS150.05E

Introduction

1
Purpose of the printer
•
Medium resolution (320 dpi) DICOM network dry printer for
14x17", 14x14", 14x11", 10x12", 8x10" DT2 blue base or clear base films
Printing principle
•
Direct thermal on thermo-sensitive, dry films
•
2 input trays and 1 output tray
Main application
•
Well suited to all medical applications, especially CR applications. Cannot be used
for mammography
Connections
•
1 Gb/s Network connection (Default: automatic detection of 10Mb/s and 100Mb/s
network is enabled, automatic detection of 1Gb/s network is disabled)
Service Concept
•
Customer installable
•
No service PC needed for basic installation, maintenance and service, but is
convenient for entering detailed host profile settings
•
Strict modular design: Production assemblies = service assemblies
•
All switches, sensors and motors are monitored via current measurement on
main engine board (Devil CPU)
•
If online diagnosis does not detect the exact reason for the error, an offline check
of the modules can be performed via browser pages
The controlled versi
Edition 1, Revision 1
06-2009
Ultrasound
Figure 1: Typical network installation of a Drystar 5302
DOCUMENT CONTROL NOTE:
on of this document resides on MedNet. Any printed copy of this document is uncontrolled
DRYSTAR 5302
Type 5366/100
Functional Description
CR QS
DX-S
Printer
Service
Host
.
Chapter 2 / 4
Agfa Company Confidentia