Connecting To A Pc Via Usb (Installing Wtviewerfreeplus) - YOKOGAWA WT332E User Manual

2.12 Connecting to a PC via USB (Installing
WTViewerFreePlus)
When you connect this instrument to a PC, you can save measured data to the PC and change
the settings of this instrument from the PC. In addition, you can use WTViewerFreePlus, which is a
software application supplied with this instrument, to save measured data to the PC and change the
settings of this instrument, without having to create original communication control programs.
PC monitor
WT332E/WT333E
WT310E/WT310EH
Saved data
Setting changes
This instrument can be connected to a PC using the following communication interfaces.
• USB
• GP-IB
• RS-232
• Ethernet
This section explains how to connect this instrument to a PC via USB. To connect to a PC via a
different communication interface, see chapter 4 in the WTViewerFreePlus User's Manual, IM 760121-
02E.
Connecting this instrument to a PC via USB
Use a USB cable to connect the USB port for PCs (type B connector) on the rear panel of this
instrument to the PC.
PC
WT332E/WT333E
WT310E/WT310EH
USB port
USB port
USB cable
2-52
IM WT310E-02EN