Table of Contents
Advertisement
6.2 System Installation
The T1000 Series Power (UPS) module, optional Battery module(s), and optional Transformer module can
be purchased in either a rackmount or tower configuration. All three modules are a standard 3U (3 Rack
Units) tall, and fit a standard 19 in. rack.
TOWER CONFIGURATION:
In the tower configuration, the orientation of the modules are rotated 90 degrees counter-clockwise,
placing the ventilation openings on the bottom. A slip-on Tower Cap is used to provide physical stability
for systems of two or more tower modules, including tower systems with optional casters. (Figure 6-5)
•
OPTIONAL: TOWER CAPS
Each 2-Module tower system comes with a Tower Cap that helps maintain physical tower stability.
Optional 3-Module Tower Caps are available for larger systems.
•
OPTIONAL: CASTERS
An optional caster kit may also be purchased with each module to facilitate relocating the system
before and after installation.
RACKMOUNT CONFIGURATION:
Each rackmount configuration module ships with a 4-Post
Rack Fixed Mounting Kit, P/N 92802, for mounting the
module in a standard 19 inch rack.
Other rack mounting kit configurations are available: (Fig-
ure 6-6)
•
OPTIONAL: 2-POST RACK FIXED MOUNTING KIT
Hardware for mounting system modules in a standard
19 inch 2-post rack. See Appendix E.
•
OPTIONAL: 4-POST RACK SLIDE MOUNTING KIT
Hardware for mounting system modules in a standard
19 inch 4-post rack with fully extending slide rails. See
Appendix E.
•
OPTIONAL: 2-POST RACK SLIDE MOUNTING KIT
Hardware for mounting system modules in a standard
19 inch 2-post rack with fully extending slide rails. See
Appendix E.
TOWER WITH CAP
FIGURE 6-5: TOWER
INSTALLATION OPTIONS
T1000 Series UPS Installation and Operation Manual – 91074-002
TOWER WITH CAP AND CASTERS
2-POST RACK
4-POST RACK
FIXED INST.
FIXED INST.
2-POST RACK
4-POST RACK
WITH SLIDES
WITH SLIDES
FIGURE 6-6: RACK
INSTALLATION OPTIONS
11
Advertisement
Table of Contents
