Uncrating/Inspection/Storage/Disposal; Uncrating The Battery System - Toshiba 4200FA Series Operation Manual

Battery cabinet system for 4200fa series 15 & 25kva ups
Hide thumbs Also See for 4200FA Series:
Table of Contents

Advertisement

2.0

Uncrating/Inspection/Storage/Disposal

2.1

Uncrating the Battery System

Upon receipt of the Battery System, a careful inspection for shipping damage should be
made.
2)
Unbolt the rails from the shipping pallet.
Place the rails on the front of the pallet
as shown in figure 2.2 and figure 2.3.
Use the four 1/2x3" bolts used to secure
the rails to the shipping pallet to attach
the rails as shown to the front of the
pallet.
TOSHIBA
1)
On International models only, remove the screws
that attach the shipping crate to the pallet.
Remove the crate and packing material.
Figure 2.1.1
3)
Place the tie brackets as shown in figure 2.3 in the
slots at the lower end of the ramps. SLOWLY roll
the unit down the ramp.
1/2x3" Bolts
Rails
8
Figure 2.2
Tie Brackets
Figure 2.1.3

Advertisement

Table of Contents
loading

This manual is also suitable for:

T42-bc-fa

Table of Contents