Table of Contents
Advertisement
T1000 TRANSFORMER MODULE SPECIFICATIONS
Parameter
GENERAL
Model Number:
Rackmount
Tower
Capacity Output
Topology
INPUT
Voltage (V)
Current (Nominal) (A)
Current (Max) (A)
OUTPUT
Voltage (V)
Current (Nominal) (A)
Current (Max) (A)
MECHANICAL
Cable Access
Input
Receptacles
Weight lb/(kg)
Dimensions - Rackmount WxDxH
in (mm)
Dimensions - Tower WxDxH in (mm) Standard:
Clearance - Rackmount (in/mm)
Clearance - Tower (in/mm)
Enclosure
Construction
T1000 Series UPS Installation and Operation Manual – 91074-002
T1X06000GA-N1-R3
T1X06000GA-N1
applies an autotransformer to Power Module output
Single Phase - Either 240 V or 208 V (L to L, or L to N)
Single Phase - 120 Vout (L to L)
Fused to 20 A max to any one receptacle,
50 A total across all four receptacles
(Note: North American plugs with 2 vertical blades are limited to 15 A max,
while plugs with one vertical and one horizontal blade are limited to 20A)
Anderson connectors from Power Module
4 x 5-20R Duplex Output Receptacles
76 lb. (34.5 kg)
w/o Side Supp. Tab: 16.73 in x 24.38 in x 5.22 in
(425 mm x 619 mm x 133 mm)
w/ Side Supp. Tab: 19.03 in x 24.38 in x 5.22 in
(483 mm x 619 mm x 133 mm)
5.22 in x x 24.38 in x 16.73 in
(133 mm x 619 mm x 425 mm)
Caster Option: 5.22 in x 29.29 in x 17.48 in
(133 mm x 744 mm x 4445 mm)
Front - 32 in., Rear - N/A in.,
Top/Bottom - 0 in., Sides N/A
Front - 32 in., Rear - 4 in.,
Sides/Top - 0 in., Bottom N/A
Enclosure of unit made from sheet metal, meets NEMA 1 and
UL Type 1 Standard
Unit enclosure made from sheet metal meeting NEMA 1 and UL
Type 1 Standard
Value
6kVA
25 A
26 A
50 A
Rear
A-7
Advertisement
Table of Contents
