Table of Contents
Advertisement
Parameter
Battery General, External
Acceptable Mfgr.
Type
Voltage - Nominal (Vdc)
Voltage - Minimum (Vdc)
Voltage -Float (Vdc)
Max Recharge Current - (Adc)
Recharge Time (Max.)
Max Discharge Current - (Adc)
Battery Level @ Shutdown
Ripple Current (Max.) (% of Full Load
Current)
Battery Leakage to Ground (mA)
Battery Capacity Required at Full Load
(W Battery)
Battery Test (Interval per hr)
Battery Low Alarm
Battery Protection
Overvoltage Protection
Protection against Batteries Deep
Discharge
Backup Time @ Full Load (Typical)
Efficiency DC-AC (%)
BATTERY - INTERNAL
Internal Back-up Time at Full Load
(at 25 °C) (min)
Type / Rating (Ah)
Number of Batteries
Replaceable Batteries
ENVIRONMENT
Cooling
Operating Temperature (°F/°C)
Storage Temperature (°F/°C)
Operating Humidity (%)
T1000 Series UPS Installation and Operation Manual – 91074-002
T1000 SPECIFICATIONS - POWER MODULE
~9 AH/12 V Valve Regulated Lead Acid, Flame Retardant
Access to batteries requires use of only Phillips head screwdriver
Maintains proper float voltage per battery specification over a tem-
perature range of 10 to 40 degree C (2.3 V/cell at 25 degree C with a
temperature coefficient of minus 5 millivolts per degree C)
1.67 VPC, ± 3% of battery voltage at FL with level automatically raised
1 Battery Module - 5 min. 2 battery Modules - 10 min.
(Typical: 1 Battery Module - 8 min. 2 battery Modules - 16 min.)
6 Batteries per tray, 3 trays per Battery Module
Value
Yuasa Taiwan only
216 Vdc
170 Vdc
245 Vdc
1.3 A
4 hours to 90%
24 hours to 100%
40 Adc (Typical)
for lighter loads
15%
100 mA maximum
6505 WB at nominal Bus Voltage
(6826 WB at shutdown)
Automatic and Manual
~90% of full 216 V Battery Charge
Fuse
2.50 VPC, ± 3% of battery voltage
Adjustable SDN (Shutdown) level
85% (Typical)
5 min.
12 Vdc, ~9 Ahr
Yes
Forced Air
0 - 40°C (32 - 104°F)
-20 - 40°C (-4 - 104°F)
30-90% (Non-Condensing)
A-3
Advertisement
Table of Contents
