Table of Contents
Advertisement
Parameter
OUTPUT
Voltage (V)
Voltage Regulation - Online Mode (%)
Voltage Regulation - Battery Mode (%)
Wave Form
Voltage Total Harmonic Distortion
(Linear Full Load) (%)
Voltage Total Harmonic Distortion
(Non-Linear Full Load) (%)
Output Voltage Adjustment (V)
Voltage Transient Response (%)
@ 0%-100% Step Load Change
Voltage Transient Response (%)
@ 100%-0%-100% Load Change
Voltage Transient Recovery with R
Load
(Recovery to 1% in x ms)
Common-mode Noise (dB)
Current (A)
Max Overload Current (continuous) (A)
Crest Factor
Leakage Current to Ground (mA)
Inrush Current Protection
Frequency (Hz)
Frequency Selectable (Converter)
Frequency Regulation (%)
Free Running Mode
Frequency Sync Range (Hz)
Slew Rate (Hz/sec)
Output Power Factor (PF)
Inverter Overload Capacity (% for sec)
Efficiency AC-DC-AC (240V) (%)
Efficiency AC-DC-AC (120V w/
Transformer Module (%)
Unloaded Power Consumption
Short Circuit Protection
Cold Start (0-100% load)
A-2
T1000 SPECIFICATIONS - POWER MODULE
200 / 208 / 220 / 230 / 240 V (L-L) and
Option with transformer for 120 V (L-N)
±3% Vrms for entire battery voltage range and 0 to 100% load
To +/- 1% of nominal voltage within 30 ms
25 A (Current limited to 25 A regardless of selected output voltage)
± 3 Hz selectable in 0.1 Hz increments (± 1 Hz default)
± 3 Hz/sec selectable in 0.1 Hz/sec increments (± 1 Hz/sec default)
(1.0 allowed if output current ≤ 25 A and output is power is ≤ 5400 W)
Electronic and Hardware Overload Protection
T1000 Series UPS Installation and Operation Manual – 91074-002
Value
± 3%
Sine wave, zero transfer time
Less than 3 % THD
Less than 5 % THD
±10 V in 1 V increments
± 8 % max.
± 8 % max.
less than 0.5 Vrms
25 A
3.0 at full load
5 mA
via Soft Start (Charge) Circuit
50 / 60 Hz auto sensing
Yes - 50/60 Hz
± 0.25 Hz
0.9 at rated voltage and current
(Min. 0.4 PF Lagging)
125% for 1 min., 150% for 10 sec.
87% (Typical)
84% (Typical)
479 W
Default Output Frequency 60 Hz
Advertisement
Table of Contents
