Table of Contents
Advertisement
6.4 Rackmount Installation - Bracket Mounting Holes
The Power Module, Battery Module, and Transformer Module all come with the mounting bracket holes
located symmetrically on each side. See Fig. 6-8 for the hole locations. Table 6-1 lists the mounting hard-
ware for the bracket holes.
1
FIGURE. 6-8: RACKMOUNT BRACKET MOUNTING HOLES
TABLE 6-1 RACKMOUNT BRACKET MOUNTING HOLES AND HARDWARE
No. Accepts (per side)
1
4 x
Phillips 8-32 x 1/4"
2
3 x
Phillips 8-32 x 1/4"
3
1 x
Phillips 10-32 x 1/2"
6.5 4-Post Rack Installation Instructions
Use the 4-Post Fixed Rackmount Kit 92802 (1 kit per module) to mount the T1000 module in a 19-inch,
4-Post rack as follows.
Contents - Fixed 4-Post Rack Installation Kit (92802)
1 ea.:
T1000 Fixed 4-Post Rack Installation Instructions - 94036
2 ea.:
68844 - Ear Chassis Mounting
2 ea.:
92746 - Bracket, Rear Fixed Mounting, 4-Post, Black
(Hardware Kit 93863)
12 ea.: Cage Nut, 1/4"-20
12 ea.: Hex bolt, Sems, 1/4"-20 x 5/8"
12 ea.: Screw, PHP (Pan Head Phillips) 10-32 x 1/2" St Box
4 ea.:
Screw, PHP 8-32 x 1/4" St Zi
Prepare the 4-Post Rack
1. Clip the cage nuts (PC76315P501 Cage Nut, 1/4"-20) from the 93863 kit over the rack rail mounting
T1000 Series UPS Installation and Operation Manual – 91074-002
Used for
Mount for front bracket 68844 used for 4-Post fixed mounting
Mount for rear bracket 92746 used for 4-Post Fixed Mounting Brackets
(Kit 92802),
Mount for rear bracket 92746 used for 4-Post Fixed Mounting Brackets
(Kit 92802),
CAUTION
Heavy object
Can cause muscle strain or back injury.
Use lifting aids and proper lifting techniques when handling or
installing T1000 Modules.
2
3
13
Advertisement
Table of Contents
