Table of Contents
Advertisement
GZ463A
4. Install the countershaft gear onto the countershaft
and secure with a snap ring (flat-side away from the
gear).
GZ299A
5. Using rubber bands to support the connecting rods,
carefully install the crankshaft assembly into the
crankcase.
GZ474
NOTE: It will be necessary to rotate the crankshaft
back and forth to engage the teeth of the oil pump and
countershaft gears.
6. Install the driveshaft; then with a flat washer on each
end of the reverse idler assembly, install into the
crankcase.
82
GZ332
GZ333
7. Install the gear shift shaft into the crankcase making
sure the flat washer is in place on the right case end
and the spacer on the gear shift stop end.
DE677A
GZ335
8. Place the larger flat washer on the drive gear end of
the countershaft and the smaller flat washer on the
high driven gear end; then with shift forks and shift
fork shaft, install the countershaft assembly into the
crankcase.
Advertisement
Table of Contents
Troubleshooting
