Enable - Datalogic Magellan 8500 Product Reference Manual

EAN-8 Enable
6-146
Enables/disables the ability of the scanner to decode EAN/JAN-8 labels.
To set this feature:
1. Scan the SWITCH barcode.
2. Scan either the enable or disable barcode below. You'll need to
cover any unused barcodes on this and the facing page to ensure
that the scanner reads only the barcode you intend to scan.
3. Complete the programming sequence by scanning the SWITCH
barcode.
EAN-8 = DISABLE
EAN-8 = ENABLE
Magellan 8500 Scanner
®