DataBar Omnidirectional/EAN-128 Emulation
6-174
Enables/disables the ability of DataBar Omnidirectional to be transmitted
as EAN-128.
To set this feature:
1. Scan the SWITCH barcode.
2. Scan either the enable or disable barcode below. You'll need to
cover any unused barcodes on this and the facing page to ensure
that the scanner reads only the barcode you intend to scan.
3. Complete the programming sequence by scanning the SWITCH
barcode.
DATABAR OMNIDIRECTIONAL/EAN-128 EMULATION = DISABLE
DATABAR OMNIDIRECTIONAL/EAN-128 EMULATION = ENABLE
Magellan
8500 Scanner
®