Code 128 Length Control - Datalogic Magellan 8500 Product Reference Manual

Hide thumbs Also See for Magellan 8500:

Table of Contents

Code 128 Length Control

This feature specifies whether variable-length or fixed-length decoding

will be set for Code 128.

To set this feature:

1. Scan the SWITCH barcode.

2. Scan your selection from the barcodes below. You'll need to cover

any unused barcodes on this and the facing page to ensure that

the scanner reads only the barcode you intend to scan.

3. Complete the programming sequence by scanning the SWITCH

If variable-length control was selected, you must now set the features

Code 128 Maximum Label Length and Code 128 Minimum

Label Length. If fixed-length control was selected, you must now set

Code 128 Fixed Length 1 and Code 128 Fixed Length 2.

CODE 128 LENGTH CONTROL = VARIABLE-LENGTH

CODE 128 LENGTH CONTROL = FIXED-LENGTH

8500 Scanner

Show Quick Links

Table of Contents