Codabar Start Stop Character Match - Datalogic Magellan 8500 Product Reference Manual

Codabar Start Stop Character Match

6-234
Enables/disables the requirement that start and stop characters match.
To set this feature:
1. Scan the SWITCH barcode.
2. Scan either the enable or disable barcode below. You'll need to
cover any unused barcodes on this and the facing page to ensure
that the scanner reads only the barcode you intend to scan.
3. Complete the programming sequence by scanning the SWITCH
barcode.
CODABAR START STOP CHARACTER MATCH = DISABLE
CODABAR START STOP CHARACTER MATCH = ENABLE
Magellan 8500 Scanner
®