Good Read Beep Volume - Datalogic Magellan 8500 Product Reference Manual

Good Read Beep Volume

Product Reference Guide
Selects the beeper volume upon a good read beep. There are five selectable
volumes, with each volume increment adding approximately five decibels
to the previous level:
• 0 = Lowest Volume
• 1 = Medium-Low Volume
• 2 = Medium Volume
• 3 = Medium-High Volume
• 4 =Highest Volume
To set the Good Read Beep Volume:
1. Scan the SWITCH barcode.
2. Scan your selected volume barcode from this or the following
pages. You'll need to cover any unused barcodes on this and the
facing page to ensure that the scanner reads only the barcode you
intend to scan.
3. Complete the programming sequence by scanning the SWITCH
barcode.
GOOD READ BEEP VOLUME = LOWEST
6-27