MSI/Plessey Number of Check Characters
Check characters are always modulus 10.
NOTE
6-256
Specifies number of MSI/Plessey check characters to be calculated and
verified.
To set this feature:
1. Scan the SWITCH barcode.
2. Scan the barcode below representing the desired number of MSI/
Plessey check characters to be calculated and verified. You'll need
to cover any unused barcodes on this and the facing page to
ensure that the scanner reads only the barcode you intend to scan.
3. Complete the programming sequence by scanning the SWITCH
barcode.
MSI/PLESSEY NUMBER OF CHECK CHARACTERS = 1
MSI/PLESSEY NUMBER OF CHECK CHARACTERS = 2
Magellan
8500 Scanner
®