Code 93 Fixed Length 1
NOTE
Product Reference Guide
This feature specifies Code 93 first fixed length.
This applies when Code 93 Length Control is set to fixed-length
decoding.
To set this feature:
1. Scan the SWITCH barcode.
2. Scan the barcode, SET CODE 93 FIXED LENGTH 1 below.
You'll need to cover any unused barcodes on this and the facing
page to ensure that the scanner reads only the barcode you intend
to scan.
3. Scan the appropriate digits from the keypad in
represent the desired fixed label length. The selectable range for
this option is 01 to 50. Pad all single digit numbers with a leading
zero to yield a two-digit entry (01-50).
4. Complete the programming sequence by scanning the SWITCH
barcode.
SET CODE 93 FIXED LENGTH 1
that
Appendix C
6-251