Standard 2 Of 5 Check Character Calculation - Datalogic Magellan 8500 Product Reference Manual

Standard 2 of 5 Check Character Calculation

NOTE
Product Reference Guide
Enables/disables calculation and verification of an optional Standard 2 of
5 check character.
If check character calculation is disabled, the risk is increased that a mis-
read can occur. When disabled, any check character in a barcode is
treated as data character.
To set this feature:
1. Scan the SWITCH barcode.
2. Scan either the enable or disable barcode below. You'll need to cover
any unused barcodes on this and the facing page to ensure that the
scanner reads only the barcode you intend to scan.
3. Complete the programming sequence by scanning the SWITCH
barcode.
STANDARD 2 of 5 CHECK CHARACTER CALCULATION = DISABLE
STANDARD 2 of 5 CHECK CHARACTER CALCULATION = ENABLE
6-267