Scale Enforced Zero Return - Datalogic Magellan 8500 Product Reference Manual

Scale Enforced Zero Return

Product Reference Guide
This feature enables/disables the enforced zero return of the scale. Three
settings are available for this feature:
• Disable
• Scale Must Return to Zero Weight Within Four Minutes — Scale
will require re-zeroing if a non-zero weight is left on for more
than 4 minutes
• Scale Must Return to Zero Weight Between Weight Requests —
Re-zeroing required if weight doesn't return to zero between
weight requests from the POS, plus scale will require re-zeroing if
a non-zero weight is left on for more than 4 minutes.
To set this feature:
1. Scan the SWITCH barcode.
2. Scan your selection from the barcodes below. You'll need to cover
any unused barcodes on this and the facing page to ensure that
the scanner reads only the barcode you intend to scan. The strat-
egy is to select the lowest possible filter level needed that allows
normal scale operation.
3. Complete the programming sequence by scanning the SWITCH
barcode.
SCALE ENFORCED ZERO RETURN = DISABLE
6-33