Global Suffix - Datalogic Magellan 8500 Product Reference Manual

Global Suffix

6-66
This feature applies to RS-232 interfaces (Standard, Wincor-Nixdorf, and
Single Cable). It specifies the suffix that is added to end of a label trans-
mission. Three standard options are available below. Contact your dealer
for other alternate settings for this feature.
• No Global Suffix
• CR — Carriage Return
• CR LF — Carriage Return, Line Feed
To set the Global Suffix:
1. Scan the SWITCH barcode.
2. Scan your selection from the barcodes below.
3. Complete the programming sequence by scanning the SWITCH
barcode.
GLOBAL SUFFIX = NO GLOBAL SUFFIX
Magellan 8500 Scanner
®