Manual Eas Deactivation Push Button - Datalogic Magellan 8500 Product Reference Manual

Manual EAS Deactivation Push Button

PRESS
DURATION
Manually initiates EAS
a
Momentary
deactivation
Allows scanner to resume
3 Seconds upon
function despite EAS sys-
EAS error
tem failure (non-fatal error)
a. For use in Coupled Mode only
b. "Downstream" in this case is defined as being the downstream side of the scan window from the direction
of product flow, or scanning direction.
c. If the EAS failure corrects itself, blinking will stop and the EAS LED will turn green.
A-8
Using the programming bar codes contained in
the button can be configured to operate always, or only function when the
scanner is enabled.
FUNCTION COMMENT
Place the item with the EAS tag downstream
zontal scan window and push the button.
EAS Failure Mode is indicated
- EAS LED blinks ON/OFF red, scanning disabled.
- FRU Status LED Indicator blinks '9'
- Error tone is sounded for one second
Upon pressing the button for 3 seconds, the scanner will
sound 3 high-pitched beeps, then resume scan function.
The EAS LED and FRU Status LED will continue blinking
as above, but at a slower rate until EAS system function
is restored.
Magellan
Chapter 6, Programming
b
of the hori-
c
by:
8500 Scanner
®
,