Scale Enable
Recalibration/recertification may be required when adding scale functional-
ity. Consult your local Weights and Measures authority.
If this feature is enabled the scanner will expect that it is to function as a
scanner-scale, and will indicate an error if it is not a scale-equipped unit.
NOTE
See Error Codes in Section 4 for more information.
6-32
Use this feature to enable or disable scale operation.
To set this feature:
1. Scan the SWITCH barcode.
2. Scan your selection from the two barcodes below. You'll need to
cover any unused barcodes on this and the facing page to ensure
that the scanner reads only the barcode you intend to scan.
3. Complete the programming sequence by scanning the SWITCH
barcode.
SCALE = DISABLE
SCALE = ENABLE
Magellan
8500 Scanner
®