I 2 Of 5 Check Character Transmission - Datalogic Magellan 8500 Product Reference Manual

I 2 of 5 Check Character Transmission

This feature applies only when I 2 of 5 Check Character Calculation
is enabled. This item is ignored when the advanced feature, Full Label Edit,
is enabled.
NOTE
Product Reference Guide
Enables/disables transmission of an optional Interleaved 2 of 5 check char-
acter.
To set this feature:
1. Scan the SWITCH barcode.
2. Scan either the enable or disable barcode below. You'll need to
cover any unused barcodes on this and the facing page to ensure
that the scanner reads only the barcode you intend to scan.
3. Complete the programming sequence by scanning the SWITCH
barcode.
I 2 of 5 CHECK CHARACTER TRANSMISSION = DISABLE
I 2 of 5 CHECK CHARACTER TRANSMISSION = ENABLE
6-221