Code 39 Aim Id - Datalogic Magellan 8500 Product Reference Manual

Code 39 AIM ID

Product Reference Guide
This feature enables/disables transmission of the Code 39 AIM symbology
identifier.
To set this feature:
1. Scan the SWITCH barcode.
2. Scan your selection from the barcodes below. You'll need to cover
any unused barcodes on this and the facing page to ensure that
the scanner reads only the barcode you intend to scan.
3. Complete the programming sequence by scanning the SWITCH
barcode.
CODE 39 AIM ID = DISABLE
CODE 39 AIM ID = ENABLE
6-193