Navigating The Uefi Bios; Setup Menus; Getting Help - Kontron COMh-caRP User Manual

5.2 Navigating the UEFI BIOS

The COMh-caRP UEFI BIOS Setup program uses a hot key navigation system with a corresponding
legend bar displayed on the setup screens. The following table provides a list of navigation hot keys
available in the legend bar.
Hot Key Description
<F1> <F1> key invokes the General Help window
↔ <Minus> key selects the next lower value within a field
<+> <Plus> key selects the next higher value within a field
<F2> <F2> key loads previous values
<F3> <F3> key loads optimized defaults
<F4> <F4> key Saves and Exits
<←> or <→> <Left/Right> arrows select major Setup menus on menu bar, for example, Main or Advanced
<↑> or <↓> <Up/Down> arrows select fields in the current menu, for example, Setup function or sub-screen
<ESC> key exits a major Setup menu and enters the Exit Setup menu. Pressing the <ESC> key in a sub-menu displays the
<ESC>
next higher menu level
<RETURN> <RETURN> key executes a command or selects a sub-menu
Table 47: Navigation Hot Keys Available in the Legend Bar

5.3 Setup Menus

The Setup utility features a selection bar at the top of the screen that lists the menus
Figure 9: Setup Menu Selection Bar
The Setup menus available for the COMh-caRP are:
Main
Advanced
Chipset
Security
Boot
Save & Exit
The currently active menu is highlighted in grey, the currently active UEFI BIOS Setup item in white.
Use the left and right arrow keys to select the Setup menu.
Each Setup menu provides two main frames. The left frame displays all available functions and
configurable ones are displayed in blue. Functions displayed in grey provide information about the
status or the operational configuration.

5.4 Getting Help

The right frame displays a help window. The help window provides an explanation of the respective
function.
www.kontron.com
COMh-caRP User Guide
55/60