Connecting - Windows Client Ap - ATEN CS1708i User Manual

Connecting – Windows Client AP
To connect to a KVM over IP do the following::
1. From the Server List box, double-click the device that you wish to
connect to.
– Or –
Specify its IP address and port number in the Server IP and Port input
boxes.
2. Click Connect.
The Login dialog box appears:
3. Key in a valid Username and Password, and then click OK.
4. Once you have been authenticated, the Switch to remote view button
becomes active:
5. Click it to connect to the switch and bring up its GUI Main Page. For a
description of the GUI Main Page, see page 57.
Chapter 5. Logging In
53