Configuration procedure
To do...
1.
Enter system view.
2.
Configure
a secure
MAC
address.
NOTE:
The manually configured secure MAC addresses are saved in the configuration file and do not get lost,
regardless of whether the port is up or goes down. After you save the configuration file, the secure
MAC addresses saved in the configuration file are maintained even after the device restarts.
Ignoring authorization information from the RADIUS
server
The authorization information is delivered by the RADIUS server to the device after an 802.1X user or
MAC authenticated user passes RADIUS authentication. configure a port to ignore authorization
information from the RADIUS server.
To configure a port to ignore authorization information from the RADIUS server:
To do...
1.
Enter system view.
2.
Enter interface view.
3.
Ignore the authorization
information from the RADIUS
server.
NOTE:
This feature is available only on a SAP interface card in bridging mode.
Command...
system-view
port-security mac-address security mac-
In system view
address interface interface-type interface-
number vlan vlan-id
interface interface-type interface-number
In interface
port-security mac-address security mac-
view
address vlan vlan-id
Command...
system-view
interface interface-type interface-
number
port-security authorization ignore
Remarks
—
—
Required.
By default, a port uses the
authorization information from the
RADIUS server.
182
Remarks
—
Required.
Use either approach.
No secure MAC address
is configured by default.