HP A6600 Configuration Manual page 30

To do...
6. Place the local user to the
state of active or blocked.
7. Set the maximum number of
concurrent users of the local
user account.
Set the
password
aging time.
8. Configure the
Set the
password
minimum
control
password
attributes for
length.
the local user.
Configure
the
password
composition
policy.
9. Configure the binding
attributes for the local user.
Command...
state { active | block }
access-limit max-user-
number
password-control aging
aging-time
password-control
length length
password-control
composition type-
number type-number [
type-length type- length
]
bind-attribute { call-
number call-number [ :
subcall-number ] | ip
ip-address | location
port slot-number
subslot-number port-
number | mac mac-
address | vlan vlan-id }
*
18
Remarks
Optional.
When created, a local user is in the active
state by default, and the user can request
network services.
Optional.
By default, there is no limit to the maximum
number of concurrent users of a local user
account.
This limit is not effective for FTP users.
Optional.
By default, the setting for the user group is
used. If there is no such setting for the user
group, the global setting (90 days by
default) is used.
Optional.
By default, the setting for the user group is
used. If there is no such setting for the user
group, the global setting (10 characters by
default) is used.
Optional.
By default, the settings for the user group are
used. If there is no such setting for the user
group, the global settings (both are one by
default) are used.
Optional.
By default, no binding attribute is configured
for a local user.
Attribute support:
• PPP users—call-number supported.
• LAN users—ip, location, mac, and vlan
supported.
• Other types of local user—No binding
attribute is supported.