HP A6600 Configuration Manual page 200

Packet unit
Use the following command to view the configuration information of the ISP domain named sun:
<Router> display domain sun
Domain : sun
State : Active
Access-limit : 30
Accounting method : Required
Default authentication scheme
Default authorization scheme
Default accounting scheme
Domain User Template:
Idle-cut : Disabled
Self-service : Disabled
Authorization attributes:
Use the following command to view the port security configuration information:
[Router] display port-security interface gigabitethernet 1/0/1
Equipment port-security is enabled
Trap is disabled
Disableport Timeout: 20s
OUI value:
Index is 1, OUI value is 123401
Index is 2, OUI value is 123402
Index is 3, OUI value is 123403
Index is 4, OUI value is 123404
Index is 5, OUI value is 123405
GigabitEthernet1/0/1 is link-up
Port mode is userLoginWithOUI
NeedToKnow mode is disabled
Intrusion Protection mode is NoAction
Max MAC address number is not configured
Stored MAC address number is 0
Authorization is permitted
After an 802.1X user gets online, you see that the number of secure MAC addresses stored is 1. also
use the following command to view information about 802.1X:
[Router] display dot1x interface GigabitEthernet 1/0/1
Equipment 802.1X protocol is enabled
CHAP authentication is enabled
Proxy trap checker is disabled
Proxy logoff checker is disabled
EAD quick deploy is disabled
Configuration: Transmit Period
Quiet Period
Supp Timeout
Reauth Period
The maximal retransmitting times
: radius:radsun
: radius:radsun
: radius:radsun
30 s, Handshake Period
60 s, Quiet Period Timer is disabled
30 s, Server Timeout
3600 s
188
: one
15 s
100 s
2