Setting User Group Password Control Parameters; Setting Local User Password Control Parameters - HP A6600 Configuration Manual

CAUTION:
The specified action to be taken after a user fails to log in for the specified number of attempts takes
effect immediately and can affect the users already in the blacklist. Other password control
configurations take effect only for users logging in later and passwords configured later.

Setting user group password control parameters

To do...
1. Enter system view.
2. Create a user group and
enter user group view.
3. Configure the password
aging time for the user group.
4. Configure the minimum
password length for the user
group.
5. Configure the password
composition policy for the
user group.

Setting local user password control parameters

To do...
1. Enter system view.
2. Create a local user and enter
local user view.
3. Configure the password
aging time for the local user.
4. Configure the minimum
password length for the local
user.
Command...
system-view
user-group group-name
password-control aging aging-
time
password-control length length
password-control composition
type-number type-number [ type-
length type-length ]
Command...
system-view
local-user user-name
password-control aging aging-
time
password-control length length
202
Remarks
—
—
Optional.
By default, the password aging
time configured in system view is
used.
Optional.
By default, the minimum password
length configured in system view
is used.
Optional.
By default, the password
composition policy configured in
system view is used.
Remarks
—
—
Optional.
By default, the setting for the user
group to which the local user
belongs is used. If no aging time
is configured for the user group,
the setting in system view is used.
Optional.
By default, the setting for the user
group to which the local user
belongs is used. If no minimum
password length is configured for
the user group, the setting in
system view is used.