HP A6600 Configuration Manual page 290

-----------------------------
IPsec policy name: "btoa"
sequence number: 1
mode: tunnel
-----------------------------
connection id: 3
encapsulation mode: tunnel
perfect forward secrecy:
tunnel:
local address: 1.1.1.1
remote address: 1.1.1.2
flow :
sour addr: 0.0.0.0/0.0.0.0
dest addr: 0.0.0.0/0.0.0.0
[inbound ESP SAs]
spi: 1974923076 (0x75b6ef44)
proposal: ESP-ENCRYPT-DES ESP-AUTH-MD5
sa duration (kilobytes/sec): 1843200/3600
sa remaining duration (kilobytes/sec): 1843199/3503
max received sequence-number: 5
anti-replay check enable: Y
anti-replay window size: 32
udp encapsulation used for nat traversal: N
[outbound ESP SAs]
spi: 2364632148 (0x8cf16c54)
proposal: ESP-ENCRYPT-DES ESP-AUTH-MD5
sa duration (kilobytes/sec): 1843200/3600
sa remaining duration (kilobytes/sec): 1843199/3503
max sent sequence-number: 6
udp encapsulation used for nat traversal: N
On Router B, ping the IP address of the interface on Router A that connects to the branch.
[RouterB] ping -a 192.168.1.1 172.17.17.1
PING 172.17.17.1: 56
Reply from 172.17.17.1: bytes=56 Sequence=1 ttl=255 time=15 ms
Reply from 172.17.17.1: bytes=56 Sequence=2 ttl=255 time=10 ms
Reply from 172.17.17.1: bytes=56 Sequence=3 ttl=255 time=10 ms
Reply from 172.17.17.1: bytes=56 Sequence=4 ttl=255 time=5 ms
Reply from 172.17.17.1: bytes=56 Sequence=5 ttl=255 time=4 ms
port: 0
port: 0
data bytes, press CTRL_C to break
278
protocol: IP
protocol: IP