HP A6600 Configuration Manual page 451

Configuration procedure
Configure Router B.
1.
# Define ACL 2010 to permit traffic from network 10.1.1.0/24 to pass.
<RouterB> system-view
[RouterB] acl number 2010
[RouterB-acl-basic-2010] rule permit source 10.1.1.0 0.0.0.255
[RouterB-acl-basic-2010] quit
# Specify the IP address of GigabitEthernet1/0/1.
[RouterB] interface GigabitEthernet1/0/1
[RouterB-GigabitEthernet1/0/1] ip address 1.1.1.2 255.255.255.0
# Enable strict URPF check on GigabitEthernet1/0/1.
[RouterB-GigabitEthernet1/0/1] ip urpf strict acl 2010
Configure Router A.
2.
# Specify the IP address of GigabitEthernet1/0/1.
<RouterA> system-view
[RouterA] interface GigabitEthernet1/0/1
[RouterA- GigabitEthernet1/0/1] ip address 1.1.1.1 255.255.255.0
# Enable strict URPF check on GigabitEthernet1/0/1, and allow use of the default route for URPF check.
[RouterA-GigabitEthernet1/0/1] ip urpf strict allow-default-route
439