# Associate the portal device with the IP address group.
As shown in
Figure
55, in the device list on the portal device configuration page, click the icon in the
Port Group Information Management column of device NAS to enter the port group configuration page.
Figure 55 Device list
On the port group configuration page, click Add to enter the page for adding a port group, as shown in
Figure
56. Perform the following configurations:
Enter the port group name.
a.
Select the configured IP address group. The IP address used by the user to access the network
b.
must be within this IP address group.
Use the default settings for other parameters.
c.
Figure 56 Port group configuration
# Select User Access Manager > Service Parameters > Validate System Configuration from the
navigation tree to make the above configurations take effect.
Configure the router.
2.
Configure a RADIUS scheme.
•
# Create a RADIUS scheme named rs1 and enter its view.
<Router> system-view
[Router] radius scheme rs1
142