Displaying And Maintaining Password Control; Password Control Configuration Example - HP A6600 Configuration Manual

Displaying and maintaining password control

To do...
Display password control
configuration information
Display information about users
blacklisted due to authentication
failure
Delete users from the blacklist
Clear history password records
NOTE:
The reset password-control history-record command can delete the history password records of one or
all users even when the password history function is disabled.

Password control configuration example

Network requirements
Implementing the following global password control policy:
An FTP or VTY user failing to provide the correct password in two successive login attempts is
•
permanently prohibited from logging in.
A user can log in five times within 60 days after the password expires.
•
The password aging time is 30 days.
•
The minimum password update interval is 36 hours.
•
The maximum account idle time is 30 days.
•
A password cannot contain the username or the reverse of the username.
•
No character occurs consecutively three or more times in a password.
•
Implementing the following super password control policy:
A super password must contain at least three types of valid characters, five or more of each type.
•
Implementing the following password control policy for local Telnet user test:
The password must contain at least 12 characters.
•
The password must consist of at least two types of valid characters, five or more of each type.
•
The password aging time is 20 days.
•
Command...
display password-control [ super ]
[ | { begin | exclude | include }
regular-expression ]
display password-control blacklist
[ user-name name | ip ipv4-
address | ipv6 ipv6-address ] [ | {
begin | exclude | include }
regular-expression ]
reset password-control blacklist [
user-name name ]
reset password-control history-
record [ user-name name | super
[ level level ] ]
204
Remarks
Available in any view
Available in any view
Available in user view
Available in user view