To do...
1.
Enter system view.
2.
Disable next payload field checking.
Displaying and maintaining IKE
To do...
Display IKE DPD information
Display IKE peer information
Display IKE SA information
Display IKE proposal information
Clear SAs established by IKE
IKE configuration examples
Main mode IKE with pre-shared key authentication
configuration example
Network requirements
As shown in
Router B to secure the communication between subnet 10.1.1.0/24 and subnet 10.1.2.0/24.
Router A is configured with an IKE proposal using the sequence number of 10 and the authentication
algorithm of MD5. Router B has only the default IKE proposal.
The two routers use the pre-shared key authentication method.
Command...
display ike dpd [ dpd-name ] [ | {
begin | exclude | include }
regular-expression ]
display ike peer [ peer-name ] [ |
{ begin | exclude | include }
regular-expression ]
display ike sa [ verbose [
connection-id connection-id |
remote-address remote-address ] ]
[ | { begin | exclude | include }
regular-expression ]
display ike proposal [ | { begin |
exclude | include } regular-
expression ]
reset ike sa [ connection-id ]
Figure
102, an IPsec tunnel is established through IKE negotiation between Router A and
Command...
system-view
ike next-payload check disabled
294
Remark
—
Required
Enabled by default
Remarks
Available in any view
Available in any view
Available in any view
Available in any view
Available in user view