HP A6600 Configuration Manual page 434

Configuration procedure
Configure Router A.
1.
# Configure the IP address of GigabitEthernet1/0/1.
<RouterA> system-view
[RouterA] interface gigabitethernet1/0/1
[RouterA-GigabitEthernet1/0/1] ip address 10.1.1.1 24
[RouterA-GigabitEthernet1/0/1] quit
# Configure DHCP.
[RouterA] dhcp enable
[RouterA] dhcp server ip-pool 1
[RouterA-dhcp-pool-1] network 10.10.1.0 mask 255.255.255.0
[RouterA-dhcp-pool-1] gateway-list 10.10.1.1
[RouterA-dhcp-pool-1] quit
[RouterA] ip route-static 10.10.1.0 24 10.1.1.2
Configure Router B.
2.
# Enable DHCP.
<RouterB> system-view
[RouterB] dhcp enable
# Configure the IP addresses of GigabitEthernet1/0/1 and GigabitEthernet1/0/2.
[RouterB] interface gigabitethernet1/0/1
[RouterB-GigabitEthernet1/0/1] ip address 10.1.1.2 24
[RouterB-GigabitEthernet1/0/1] quit
[RouterB] interface gigabitethernet1/0/2
[RouterB-GigabitEthernet1/0/2] ip address 10.10.1.1 24
# Enable DHCP relay agent on GigabitEthernet1/0/2.
[RouterB-GigabitEthernet1/0/2] dhcp select relay
[RouterB-GigabitEthernet1/0/2] quit
# Add the DHCP server 10.1.1.1 to DHCP server group 1.
[RouterB] dhcp relay server-group 1 ip 10.1.1.1
# Correlate GigabitEthernet 1/0/2 to DHCP server group 1.
[RouterB] interface gigabitethernet1/0/2
[RouterB-GigabitEthernet1/0/2] dhcp relay server-select 1
# Configure the DHCP server to support authorized ARP.
[RouterB-GigabitEthernet1/0/2] dhcp update arp
# Enable authorized ARP.
[RouterB-GigabitEthernet1/0/2] arp authorized enable
# Configure aging time for the authorized ARP entries.
[RouterB-Ethernet1GigabitEthernet1/0/2] arp authorized time-out 120
[RouterB-GigabitEthernet1/0/2] quit
422