HP A6600 Configuration Manual page 78

Configure the Portal server (iMC PLAT 5.0).
2.
# Configure the portal server.
Log in to the iMC management platform and click the Service tab. Then, select User Access Manager >
Portal Service Management > Server from the navigation tree to enter the portal server configuration
page, as shown in Figure
Enter the URL address of the portal authentication main page, in the format of
a.
http://ip:port/portal, where ip and port are those configured during iMC UAM installation.
Usually, the default setting of port 8080 is used.
Click OK to finish the operation.
b.
Figure 23 Portal server configuration
# Configure the IP address group.
Select User Access Manager > Portal Service Management > IP Group from the navigation tree to enter
the portal IP address group configuration page. Then, click Add to enter the page for adding an IP
address group, as shown in
Enter the name Portal_user.
a.
Set the start IP address to 192.168.1.1 and the end IP address to 192.168.1.255. The IP
b.
address of the host must be within this IP address group.
Select Normal for Action.
c.
Click OK to finish the operation.
d.
23.
Figure 24.
66