HP A6600 Configuration Manual page 314

# Configure dialer interface Dialer 0. Use the username and password assigned by the ISP for dial and
PPP authentication.
[RouterB] interface dialer 0
[RouterB-Dialer0] link-protocol ppp
[RouterB-Dialer0] ppp pap local-user test password simple 123456
[RouterB-Dialer0] ip address ppp-negotiate
[RouterB-Dialer0] dialer user 1
[RouterB-Dialer0] dialer-group 1
[RouterB-Dialer0] dialer bundle 1
[RouterB-Dialer0] ipsec policy policy
[RouterB-Dialer0] mtu 1492
[RouterB-Dialer0] quit
# Configure a static route to the headquarters LAN.
[RouterB] ip route-static 172.16.0.0 255.255.255.0 dialer 0
# Configure interface GigabitEthernet 1/0/1.
[RouterB] interface gigabitethernet 1/0/1
[RouterB-GigabitEthernet1/0/1] tcp mss 1450
[RouterB-GigabitEthernet1/0/1] ip address 192.168.0.1 255.255.255.0
[RouterB-GigabitEthernet1/0/1] quit
# Create a virtual Ethernet interface, and create a PPPoE session that uses dialer bundle 1 on the
interface.
[RouterB] interface virtual-ethernet 0
[RouterB-Virtual-Ethernet0] pppoe-client dial-bundle-number 1
[RouterB-Virtual-Ethernet0] mac-address 0011-0022-0012
# Map the virtual Ethernet interface to a PVC on interface ATM 1/1/1.
[RouterB] interface atm 1/1/1
[RouterB-Atm1/1/1] pvc 0/100
[RouterB-atm-pvc-Atm1/1/1-0/100] map bridge virtual-ethernet 0
[RouterB-atm-pvc-Atm1/1/1-0/100] quit
302