HP A6600 Configuration Manual page 76

# Add a charging plan.
Click the Service tab, and select Accounting Manager > Charging Plans from the navigation tree to enter
the charging plan configuration page. Then, click Add to enter the Add Charging Plan page, and
perform the following configurations as shown in
Add a plan named UserAcct.
a.
Select Flat rate as the charging template.
b.
In the Basic Plan Settings field, configure the fixed fee as 120 dollars per month.
c.
In the Service Usage Limit field, set the Usage Threshold to 120 hours, allowing the user to
d.
access the Internet for up to 120 hours per month.
Adopt the default settings for other parameters, and click OK to finish the operation.
e.
Figure 20 Add a charging policy
# Add a service.
Click the Service tab, and select User Access Manager > Service Configuration from the navigation tree
to enter the Service Configuration page. Then, click Add to enter the Add Service Configuration page,
and perform the following configurations as shown in
Add a service named Portal-auth/acct, and set the Service Suffix to dm1, which indicates the
a.
authentication domain for the portal user. With the service suffix configured, you must configure
the usernames to be sent to the RADIUS server to carry the domain name.
Specify UserAcct as the Charging Plan.
b.
Configure other parameters according to the actual situation.
c.
Click OK to finish the operation.
d.
Figure 20:
Figure 21:
64