HP A6600 Configuration Manual page 159

Configuration procedure
Configure Router A:
Configure a RADIUS scheme.
1.
# Create a RADIUS scheme named rs1 and enter its view.
<RouterA> system-view
[RouterA] radius scheme rs1
# Set the server type for the RADIUS scheme. When using the iMC server, you must set the server type to
extended.
[RouterA-radius-rs1] server-type extended
# Specify the primary authentication server and primary accounting server, and configure the keys for
communication with the servers.
[RouterA-radius-rs1] primary authentication 192.168.0.112
[RouterA-radius-rs1] primary accounting 192.168.0.112
[RouterA-radius-rs1] key authentication radius
[RouterA-radius-rs1] key accounting radius
# Specify that the ISP domain name should not be included in the username sent to the RADIUS server.
[RouterA-radius-rs1] user-name-format without-domain
[RouterA-radius-rs1] quit
Configure an authentication domain.
2.
# Create an ISP domain named dm1 and enter its view.
[RouterA] domain dm1
# Configure AAA methods for the ISP domain.
[RouterA-isp-dm1] authentication portal radius-scheme rs1
[RouterA-isp-dm1] authorization portal radius-scheme rs1
[RouterA-isp-dm1] accounting portal radius-scheme rs1
[RouterA-isp-dm1] quit
# Configure dm1 as the default ISP domain for all users. Then, if a user enters a username without any
ISP domain at logon, the authentication and accounting methods of the default domain are used for the
user.
[RouterA] domain default enable dm1
Configure portal authentication.
3.
# Configure the portal server as needed:
[RouterA]
http://192.168.0.111:8080/portal
portal server newpt ip 192.168.0.111
147
key portal port 50100 url