HP A6600 Configuration Manual page 80

# Associate the portal device with the IP address group.
As shown in Figure 26, click the icon in the Port Group Information Management column of device NAS
to enter the port group configuration page.
Figure 26 Device list
On the port group configuration page, click Add enter the page for adding a port group, as shown in
Figure 27:
Enter the port group name.
a.
Select the configured IP address group. The IP address used by the user to access the network
b.
must be within this IP address group.
Use the default settings for other parameters, and click OK to finish the operation.
c.
Figure 27 Port group configuration
# Select User Access Manager > Service Parameters > Validate System Configuration from the
navigation tree to validate the configurations.
Configure the router.
3.
Configure a RADIUS scheme.
•
68