HP A6600 Configuration Manual page 64

Figure 11 Add an access device
# Add a user for device management.
Log in to the iMC management platform, click the User tab, and select Device Management User from
the navigation tree to enter the Device Management User page. Then, click Add to enter the Add Device
Management User page, and perform the following configurations as shown in
Add a user named hello@bbb and specify the password,
a.
Select SSH as the service type,
b.
Set the EXEC privilege level to 3. This value identifies the privilege level of the SSH user after
c.
login, which is 0 by default.
Specify the IP address range of the hosts to be managed as 10.1.1.0 to 10.1.1.255, and click
d.
OK to finish the operation.
NOTE:
The IP address range of the hosts to be managed must contain the IP address of the added access
device.
52
Figure 12: