Host Interface Menu Options
The printer provides the following standard host interface options:
Parallel (Centronics compatible)
Serial (RS–232 or RS–422)
The configurations for each interface type are described in the following pages.
Set these options to meet the specific data communications requirements set by
the host system and by the application program running on the host. Refer to
Figure 3–12.
Parallel Interface
Host Interface
Parallel
Data Bit 8
Disable
Enable *
Configuring the Printer
Serial
Data Polarity
Fault Polarity
Normal *
Normal *
Inverted
Inverted
Figure 3–12. Host Parallel Interface Menu
PE Polarity
Normal *
Inverted
Press
to view options.
Press
to select an option.
Press
to exit the configuration
menu.
= Factory Default
3–35